Category Archives: SystemCenter

SystemCenter and all components…

Install SystemCenter DPM 2016 – HowTo…


We need the following prerequisites first:

  • 2 vCPU
  • 4096MB Memory dynamic min. 512MB – max. 8192MB
  • Systemdrive – 128GB Dynamic
  • Backupdrive – <whatever you need>GB
User Accounts:
Login Purpose Permission
DOMAIN\_svc_sqlservice Account for SQL Database Instance on DPM Server none (permissions set by sql setup…)
DOMAIN\_svc_sqlreporting Account for SQL Reporting Instance on DPM Server none (permissions set by sql setup…)
DOMAIN\_svc_sqlagent Account for SQL Agent on DPM Server none (permissions set by sql setup…)

Install SQL Server local on DPM Server or use a remote SQL Server (DPM 2016 does not support AlwaysOn Groups – so i will install a local SQL Server instance on DPM VM itself)


SQL components you need:

  • DataBase engine
  • Reporting Services Native addition you need SQL Server Management Studio (DPM setup check this prerequisite) – if you do not install management studio you will receive this error while installation of DPM: start install of SQL Management Studio:


The ISO of DPM you can download, have only a single MSI file that extract the source files for installation – you can mount this from a remote source, extract remote, or as same i will do – copy the MSI to C:\Temp – double-click on the MSI package and enter C:\Temp\DPM2016Setup as destination directory.

After extracting – double-click on setup.exe – install will start:

…enter the localhost-name and the name of the sql instance you installed before with the SQLxxx.ini…

…setup will check and install all prereq´s – while installing Hyper-V PowerShell Modules you have to restart the DPM server and run setup again:

..after reboot – start DPM setup again:

…after finishing of setup – install all updates – at time of creation of this blog it is “Update Rollup 2 – Data Protection Manager 2016”

Remote Administration:

If you want to remotely manage your DPM server and have a “Administration Workstation” you can install “DPM Remote Administration” there. (HINT: other tutorials and howto´s tell you that you need SCOM, Management-Packs,… to install Remote Tools – thats not correct – for “Remote Administration” you need nothing of these – you need SCOM,.. only if you want to install “DPM Central Console”…

…after finish setup of Remote Administration you have to check for Updates – because DPM Console checks the version between Console and Server and need the same on both. (you receive an error starting a console with an old version…)

Post-Task´s after finishing setup:

Add Disks/Volumes to DPM:

DPM uses a new concept called MBS (Modern Backup Storage) – based on ReFS Volumes with Storage Spaces – so adding disks is completely different than in DPM 2012R2 – in my case i will add two virtual disks (dynamic and 64GB) to my DPM Server VM (you can add additional disks later) and start with Server Manager in dem DPM Server VM:

…right click on the first disk and click on new storage pool (choose ONE disk has a reason: this will create a Storage Pool with column size 1 – so you can later simple add single disks to the pool)

..give the new pool a name:

…if you have a physical DPM Server with JBODs – best practice here is to add several disks and configure one of them as Hot-Spare – because we have a DPM virtually – we need no hot-spare:

…now we create a virtual disk:

…best practice is to use a simple layout:

…we use Fixed provisioning type:

…specify a size a little smaller than the disk (we expand this volume later):

…deselect create volume and click on close:

…add the second disk to storage pool:

…and extend the virtual disk:

..i will not use all (in this example) 128GB:

…now we can create a volume on the new vdisk:

..add a drive letter:

…now you can add this volume to DPM:

HINT: you have to click on rescan if you don´t see your new volume here…

…give it a friendly name and click ok:

Add Agents:

Now it´s time to add agents to DPM – click on Agents in console and click Install:

HINT: if you want to install an agent in a untrusted source (not domain joined source or in a domain that do not trust – see my post: Install DPM agent in unstrusted workgroup… my environment in want to install it first on my hyper-v cluster – so i choose my both hyper-v nodes (not necessary to include clustername – ie “hvfc”):

..enter a account that has local admin rights on this servers (you can use your own account, it is only for the installation of agent NOT for service or other purposes..)

..a reboot of ALL (because it is a cluster) is necessary to add hyper-v nodes/cluster to DPM – i will not start automatically (you must restart ALL clusternodes)

..if you receive a error – check your firewall settings on the target computers (for all port exclusions see: – for a list of exclusions only for dpm agents see:

HINT: easy way – use the following powershell cmdlets on the potentially protected computers:

..or use a GPO – after setting the correct port exclusion – agent installation will work:


Install DPM Agent in untrusted Workgroup…

To install the DPM Agent on computers running outside the DPM domain is a little bit tricky – hopefully the steps below are helping to describe this procedere:

first find the agent setup files on DPM server – to do this locate the agent setup directory with the newest version – on DPM Server browse to C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\agents\RA

inside this folder copy the appropriate OS version – ie. amd64 for the 64-bit agent:

paste this on the computer where you want to install the agent – ie. C:\Temp\DPM\Agent:

on the computer where you want to install the agent, open a CMD with admin rights and change to the directory where you copied the setup files – ie. C:\Temp\DPM\agent\amd64\1033

DPM agent needs the FQDN of the DPM server – check nslookup if name resolution working correctly or edit Hosts file to have a local name resolution

HINT: for DPM the fqdn name and NETBIOS name are two different things (!) – if you enter fqdn here, you have to enter also the fqdn on DPM SERVER side while adding the agent…

to install the agent with showing a progress bar – enter the following command:

to install completely silent – enter:

(KBxxxx reference to the newest version of agent – in this case DPM agent 2012R2CU10…)

HINT: ..if you get a 0x80070005 “Access is denied” error – try to start the DPMAgentInstaller without parameters!

confirm the “Restart message” and change to the new install dir of agent:

enter the following command:

…choose a password and DPM is creating a local user account with the name you choose – you can check this with Computer Management->Local User and Groups->Users

Agent setup also creates the following three groups:

  • DPMRADCOMTrustedMachines
  • DPMRADmTrustedMachines
  • DPMRATrustedDPMRAs

…the new account is member in the first two groups..

On DPM server do the following:

click on Management->Add -> Windows Servers:

…be careful here to enter the correct values – FQDN must resolvable from DPM server – username is in format <new_created_local_account_before> (don’t use <DOMAIN>\<accountname> here !)

click attach:

..agent should be attached with status “Success” – you have to restart the agent Computer to finish the agent Installation…

Install DPM Agent on a Domain Controller in a untrusted Domain/Workgroup…

Installing a DPM Agent on a domain controller is unfortunately not so easy as installing a dpm agent in a untrusted workgroup (dpm agent installer wants to create a local user…)

Tasks to do on DPM agent computer:

  • install Agent (ie. DPMAgentInstaller_AMD64.exe <fqdn_of_DOM_server>
  • open cmd Shell with admin rights
  • change to DPM directory (c:\Program Files\Microsoft Data Protection Manager\DPM\bin)
  • call setup:

  •  enter a new Password for DPM Agent/Server communication

Since the DPM agent computer is a domain controller of other domain, setup is creating a domain account called <new_name_for_dpm_agent>:

  • Add the agent account to the following groups on the domain controller:
    • DPMRADCOMTrustedMachines$…
    • DPMRADmTrustedMachines$…

Tasks to do on DPM server computer:

open Computer Management on DPM server to add the <new_name_for_dpm_agent> account to the following groups:

  • DPMRADCOMTrustedMachines
  • DPMRADmTrustedMachines
  • MSDPMTrustedMachines
  • Distributed COM Users

  • (only necessary if you have added this agent before) – open DPM ManagementShell with admin rights and change to DPM\bin directory – enter:

  • add agent on DPM server as usual
  • a few minutes later the new agent should appear as “Agent Status” – OK in DPM console…



Installing Highly Available SystemCenter VMM 2016 – HowTo…


if you want to install a highly available VMM you need two VM´s (to create a VMM cluster) and a extra HA SQL Server (ideally two SQL 2016 core Nodes with AlwaysOn – for installing this SQL nodes see

  • Create two VMs with a OS vhdx (optional one additional Data drive if you want to split OS and VMM in two different drives), 2 vCPUs and at minimum 4096 MB Memory (if you want to use Dynamic RAM, set Startup value to 4096MBs or more and Minimum RAM to 2048 or more, otherwise setup check will fail…) – see SystemCenter requirements:
  • Create a cluster with this two VMs, no cluster disks necessary, don’t forget to create a witness (my preferred FileShare or Cloud Witness)

  • create a AlwaysOn Listener on your SQL cluster (you can deploy VMM in a “Common” Instance with other databases or you prefer a dedicated instance for VMM – collation should be: SQL_Latin1_General_CP1_CI_AS

  • Install ADK on both VMM nodes with the following options:
    • DeploymentTools
    • Windows Preinstallation Environment

…copy downloaded ADKSetup Files to both VMM nodes and install with GUI or unattended:

…after a few minutes check c:\temp\install.txt – the last entry should be “…Exit code 0…”:

  • Install the SQL tools in GUI mode or unattended:

  • do this on both vm nodes and restart the servers
Login Purpose Permission
DOMAIN\_svc_vmmservice SCVMM Service Account Local admin rights on VMM nodes
DOMAIN\_svc_vmmrunas Service Account for manageging Hyper-V Hosts Local admin rights on Hyper-V servers/nodes
(optional) DOMAIN\_svc_vmm2scom SCVMM to SCOM connector account SCOM Admin and SCVMM Admin role
(optional) DOMAIN\_svc_vmmtemplate Account used in templates to join Domain and run scripts while deployment you can use delegate control in AD for this account – Computer Objects/Reset Password/Validated write to DNS host name/Validated write to service principal name/Read/Write Account Restrictions (This object and all descendant objects – Create/Delete Computer Objects)
Name Members Scope Permission
gg_VMMAdmins your account/_svc_vmmservice/_svc_vmmrunas Global -
lg_VMMAdmins gg_VMMAdmins Local Put this group in local admins group on VMM nodes
AD container:

if you install VMM in HA mode you must create a container in AD to allow VMM to store their key´s. See

open ADSIEdit.msc and connect to the domain partition of the active directory domain:

…double click on “Default namin context…” and right click on domain context:

..give it a name (ie. VMMDKM – “Virtual Machine Manager Distributed Key Management”)

…refresh the console:

…click on domain -> your container -> and check your if your container is created successfully:


…close ADSIEdit and open “Active Directory Users and Computers” – click View -> Advanced Features:

…open Properties of your container:

…add VMM service account with R/W/Create child permissions:

…click Advanced and chance permissions to all descendant objects:


In a VMM HA install the FileShare for Library must be created outside of VMM servers – you have to create a fileshare on a MS fileserver or fileservercluster (NAS or other CIFS components are not possible because VMM installing his own VMM agent on the fileserver for management purposes…)


you can choose between nonGUI and GUI VMM setup – even on server core edition:

Server core install:

change to your VMM setup path and edit the file VMserver.ini (ie: C:\VMMSetup\amd64\Setup\VMserver.ini)

call the setup with the following parameter:

check the VMMLog in C:\ProgramData\VMMLogs

Installation in GUI mode:

..start setup – choose install, click VMM server and next:

Server name -> Name of you AlwaysOn Listener

Port -> Listener Port

Instance name -> name of SQL instance

use your vmm-service account -> see “Accounts” above and the Distinguished Name of the container you created in AD before (see container above)

HINT: ..normally everything should ok – if you get an error like me (see text in screenshot) regarding the SCP in AD – maybe you have moved your Nodes in AD in another OU and forget to give the ClusterObject the permission to create Computer Objects within this OU! – see: or see: my case i manually create the computer object (same OU as FC object) and give the failoverclusterobject Full-rights on this new object – after that i run the configurescptool.exe command (see text above) again and voila – in Cluster Manager the Role can be started with success…

On second node:

start setup (vmmsetup recognize that it runs in a cluster and that a “primary” vmm node exist):

…if you click on VMM management server in next screen you will get the following message:

…enter registration informations again:

…settings for database are greyed-out because setup reads this info from primary installed node:

…reeenter password for vmm-service:

accept all other with next and click install:

…after a while setup should finished with success:

Last step in HA install is to make the VMM DB highly-available – we installed it with the AlwaysOn Listener but the DB itself must be switched to HA with the SQL AlwaysOn Wizard – open the SQL Studio and connect to your AO Database:

…standard SQL setup for join a single DB to AO group – change recovery mode/make backup/add db to ao group:

…right click on AOgroup and select “Add Database…”:

HINT: in SQL Alvailability group dont forget to keep your SQL users on the database in sync (!) – see: since every works perfekt until the first failover of the DB – then VMM service failed to start, because the (ie. _svc_vmmservice) user does not exist on the failover target server.

FINISH: now you have a fully highly available SCVMM installation – test it with failover of DB (nothing should happen) – and failover of VMM (an open VMM console should simple reconnecting after a few seconds)

AppController – HowTo Install


Install Prereqs from PS:

Install-WindowsFeature NET-Framework-45-Core,NET-WCF-Services45,Web-Server,Web-Static-Content,Web-Default-Doc,Web-Dir-Browsing,Web-Http-Errors,Web-Asp-Net,Web-Asp-Net45,Web-Net-Ext,Web-Net-Ext45,Web-ISAPI-Ext,Web-ISAPI-Filter,Web-Http-Logging,Web-Request-Monitor,Web-Http-Tracing,Web-Basic-Auth,Web-Windows-Auth,Web-Filtering,Web-Stat-Compression,Web-Mgmt-Console

(only for client function):

Install-WindowsFeature -Name Net-framework-core -Source G:\sources\sxs (only for Client function)

.\Silverlight_x64.exe /qb (only for Client function)

.\vcredist_x64.exe /qb (prereq for VMM Console)


VMM Console required:

  • Insert VMM CD and Install VMM Console (or start AdminConsole.msi in Prereq directory)
  • Patch VMM Console


  • Open IIS Manager – Create SSL Cert via MMC (need SANs) – if HA – use LB Name as Subject, and Sub+SANs for APPC Servers)
  • Powershell:
    New-SelfSignedCertificate -DnsName, -CertStoreLocation cert:\LocalMachine\My
    $mypwd = ConvertTo-SecureString -String “1234” -Force AsPlainText
    Get-ChildItem -Path cert:\localMachine\my\5F98EBBFE735CDDAE00E33E0FD69050EF9220254 | Export-PfxCertificate -FilePath C:\mypfx.pfx -Password $mypwd


adm_srv_appc local Admin on APPC
  • Add Account to local Admin (gg_appcadmins, adm_srv_appc)
  • Create SQL Login and give adm_srv_appc dbo rights


  • Insert APPC CD and Install AppController choose cert

Configuration steps for High Availability Install:

Open APPC PowerShell as Administrator:



  • $Password = ConvertTo-SecureString “P@ssw0rd” -AsPlainText -Force
  • Export-SCACAESKey -Path “C:\Keys\SCAC.key” -Password $Password

Install 2.APPC

  • Import SSL Cert from 1.APPC
  • Insert APPC CD and Install AppController – choose BackEnd DB – APPC Setup knows about first APPC Install and asks for Key


…AppController and VMM are a good team for building a small/medium size private cloud environment – if you want to see how VMM is installing – read: